Names And Functions - Yamaha Sound Edge Manual

Names and Functions

1
2
9
1 ABOUT button:
Click this button to see information about this version of EffectGear.
2 PULL DOWN MENU button:
Click this button to open the list of effect types. You can also open the list of effect types by
double clicking on the [Effect] display box.
3 EFFECT display box:
The name of the currently selected effect type will appear in the display box.
4 POWER OFF button:
Click this button to exit EffectGear.
5 MINIMIZE button:
Click this button to resize the EffectGear window to icon size.
6 VOICE CANCEL button:
Click this button to reduce the volume level of the vocal from a song from CD audio playback
for karaoke sing-along accompaniment.
7 HELP button:
Click this button to call up EffectGear Online Help, which will appear at the bottom of the
EffectGear window.
8 PITCH SHIFT buttons:
Click these buttons repeatedly to increase or decrease the pitch of sound by a semitone
(100 cents), which will be displayed on the LED. Original sound pitch is represented by
center position = 0; each click will move the LED display ±100 cents at a time, to a maximum
and minimum of ±400 cents.
9 SLIDERS:
The function of each slider is represented by an icon located to the left of it. Moving the slider
toward the right will increase the value of each function.
SYNTHESIZER: Lets you adjust the volume of the Sound Card's synthesizer (AWM
wave table and FM tone generator).
MICROPHONE: Lets you adjust the microphone input level.
LINE: Lets you adjust the line input level.
EFFECT FEEDBACK: Lets you adjust the effect feedback level.
EFFECT DEPTH: Lets you adjust the range of the effect depth.
MASTER VOLUME: Lets you adjust the overall output volume level.
£There are similar functions in the Mixer module of the Voyetra AudioStation; however, the pitch shift ranges are not
equivalent.
£Depending on the type of effect you select, Voice Cancel and Pitch Shift may not be applicable, and the button
display will gray out.
3
8
Sound Edge Application Software
4
5
6
7
19