Table of Contents
Advertisement
Surround
With Surround you can apply precise delay effects to the input signal.
Click the [Surround] box and the Surround setup dialog box appears.
1
2
1 Input:
Same as Sign/Level/Value in the Input Mixer, above; however, in this case it adjusts the
signal level input to the Surround.
2 IIR Filter:
See Mic Echo , above, for information about the IIR Filter.
3 Delay Design Box:
Delay is like a simultaneous echo effect. You can set the time, volume and number of delays.
See Mic Echo , above, for information about the Delay Design Box.
£
• "Reverse" from the Surround box indicates signal sound loop.
Output which feeds back into input indicates signal sound loop for each setup window.
• Surround 2 in Type2 and Type3 has an input channel exclusive to the signal sound loop as well as other inputs.
• The number of delays in the Delay Design Box may vary depending on the controller.
• Depending on the Memory setup (see page 25), you cannot set up the delay feature (e.g., if you allocate too much
memory to others, such as Mic Echo).
Sound Edge Application Software
3
3
33
•
Advertisement
Table of Contents
