Sound Settings; Ring Tone (Menu 4.1); Ring Volume (Menu 4.2); Alert Type - Samsung SGH-E800 Manual

Sound settings

You can use the Sound settings feature to
customise various settings, such as the:
• ring tone, volume, and alert type.
• sounds made when you press a key, receive a
message, push the slider up or down, switch on
or off your phone.
• alert tone made every minute during a call, when
you make an error, or when your call is connected
to the system.
Note: When the phone is in Silent mode (see
page 28), you cannot change the sound
settings.
Ring tone
(Menu 4.1)
This menu allows you to select a ring melody.
You can choose between many different melodies. If
you have downloaded sounds from the Internet or
the optional EasyGPRS programme, you can use
them in this menu.
Ring volume
(Menu 4.2)
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume. To save the ring volume, press the
key or OK soft key.
102

Alert type

(Menu 4.3)
This menu allows you to specify how you are to be
informed of incoming calls or alarms you set.
The following options are available:
Light only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the selected ring
tone or alarm melody.
Vibration: the phone vibrates but does not ring.
Vibra+melody: the phone first vibrates three
times and then starts ringing.

Keypad tone

(Menu 4.4)
This menu allows you to select the tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
Sound settings
103