Samsung SGH-E800 Manual page 89

Hide thumbs Also See for SGH-E800:
Table of Contents

Advertisement

Phone settings
Change PIN
(Menu 9.6.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock
(Menu 9.6.3)
When the Phone lock feature is enabled, the phone
is locked and you must enter an 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to "00000000" at the
factory. To change the phone password, see the
Change password menu on the following page.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch on the phone.
Enable: you are required to enter the phone
password when you switch on the phone.
Change password
(Menu 9.6.4)
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to "00000000" at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
170
Privacy
(Menu 9.6.5)
Using this menu, you can lock your media contents,
such as multimedia messages, photos, voice
memos, videos, images and sounds. Once you have
locked the contents, you must enter the phone
password to access the associated menus.
To
Press the
select an item to
Up or Down key. To lock all
lock
of the contents, select All.
place a check mark
key.
remove a check
key again.
mark
lock the marked
OK soft key.
items
When the phone asks for the phone password,
enter the password and press the
key.
Note: The password is preset to "00000000" at the
factory. To change this password, see
page 170.
SIM lock
(Menu 9.6.6)
When the SIM lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code to use a different SIM card.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
Phone settings
key or OK soft
171

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgh-e810Sgh-e810c

Table of Contents