Table of Contents
Advertisement
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily
GB
(camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector
Location
Type
LINE
Rear
Audio/Video RCA
LINE
LINE
IN
OUT
R
AUDIO
L
VIDEO
COMPONENT Rear
RCA
output
COMPONENT VIDEO OUT
S-VIDEO
Rear
S-JACK
output
S-VIDEO OUT
OUT TO TV
Rear
75
coaxial
IN FROM ANT. Rear
75
IN
coaxial
(FROM ANT.)
FM/AM Antenna Rear
75
Input
RADIO ANT.
coaxial
FM
75
COAXIAL
AM
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
10
Direction
Recommended Use
In/Out
Television
Other VCR
Out
COMPONENT out (DVD only)
Out
S-Video out (DVD only)
Out
Television
In
Aerial
Cable television network
Satellite receiver
In
FM Antenna
AM Antenna
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75
coaxial socket marked(FROM
ANT.) on the rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the socket marked(TO TV)
on your DVD-VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television,
you can also connect your DVD-VCR to the television via the
RCA cable (see section below) if your television is equipped
with this type of connection.
Connecting DVD-VCR to the TV using the RCA Cable
TV
3
RF coaxial cable
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD-VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
DVD & VCR
IN
(FROM ANT.)
LINE
LINE
IN
OUT
RADIO ANT.
FM
RF
75
GB
OUT
COAXIAL
(TO TV)
2
AM
V
TV
DVD & VCR
IN
(FROM ANT.)
LINE
LINE
IN
OUT
R
RADIO ANT.
FM
RF
75
L
OUT
COAXIAL
(TO TV)
AM
V
4
3
Aerial
DVD & VCR
IN
(FROM ANT.)
LINE
LINE
IN
OUT
R
RADIO ANT.
AUDIO
FM
RF
75
L
OUT
COAXIAL
(TO TV)
AM
VIDEO
2
11
Advertisement
Table of Contents
