Table of Contents
Advertisement
VCR
Recording from Another VCR or Camcorder
EJECT
GB
SELECT
VOL
STANDBY/ON PHONES
REC
S.MODE
COPY
PROG
P.SCAN
2
6
7
42
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any form
without the permission of the owners of the
corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied,
to the appropriate RCA audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR
or camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input.
5
Start playing back the cassette to be copied.
6
Hold REC ( ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press
on both VCR and
DVD-VCR.
If you wish to view the cassette being copied:
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
A CD, DVD
A microphone connected to a sound system
A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the rear of your DVD-VCR.
3
Insert the pre-recorded cassette on which the audio track is to
❿
be replaced, and press the
ll to start playback.
4
Search for the Audio Dubbing (ending) point using the
set the counter to 0:00:00 by pressing INFO. and CLEAR.
5
Search back slightly beyond the Audio Dubbing start point using
the
➛ ➛
button.
❿
6
Press the
ll button.
❿
Press the
ll button one more time to make Still mode.
7
Press A.DUB.
Result:
Your DVD-VCR is now in the Audio dubbing Still mode.
8
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
9
When you are ready:
Start playback on the sound system
Press the REC (
) on the remote control.
Result:
The soundtrack is replaced on the pre-recorded
cassette.
10
The audio dubbing will finish when the counter reaches 0:00:00.
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 36).
VCR
DVD & VCR
IN
(FROM ANT.)
LINE
LINE
IN
OUT
RADIO ANT.
R
AUDIO
FM
RF
75
L
COAXIAL
OUT
(TO TV)
AM
VIDEO
❿ ❿
, and
7
A.DUB
-0:05:23
43
GB
Advertisement
Table of Contents
