Gb Sound Mode Function - Samsung CHT-500H Instruction Manual

Table of Contents

Advertisement

About Speaker Setup
GB
1
2
2
1,2
FL
C
FR
FRONT SPEAKER
CENTER SPEAKER
FRONT SPEAKER
LEFT
RIGHT
SUB
WOOFER
SUB WOOFER
SPEAKER
SL
SR
SURROUND SPEAKER
SURROUND SPEAKER
LEFT
RIGHT
1
1
2
2
68
To Set the Speaker Balance
1
Press the SPEAKER button.
Each time you press the button, the selection will change as
follows: FL
C
FR
SR
SL
SU
VOL.
2
Press AMP VOL + and AMP VOL - buttons to adjust the speaker
volume.
The volume can be adjusted to a level between –10 and +10.
To Test the Speakers
1
In Stop mode, press the TEST button.
The test tone will be output to the speakers in the following
order: FL (Front Speaker/L)
C (Center Speaker)
Speaker/R)
SR (Surround Speaker/R)
Speaker/L)
SU (Subwoofer).
A hissing sound from a speaker indicates that the speaker is
installed correctly.
2
To end the speaker test, press the TEST button again.
• While the test tone is being produced, you can use the VOL
buttons to set the speaker balance for the selected channel.
• While the subwoofer is being tested, a low bass sound of
100Hz or 125Hz will be heard.
To Set the Bass/Treble
1
Press the BASS or TREBLE button.
Each time you press the BASS or TREBLE button, the
corresponding setting will turn on or off.
2
Use AMP VOL + and AMP VOL - buttons to adjust the bass or
treble of the speakers.
The bass or treble can be adjusted to a level between –10 and
+10.
Sound Mode Function
Sound Mode
Press the SOUND MODE button.
Each time you press the button, the mode will change as shown at
right.
4 STEREO/NATURAL/JAZZ/CONCERT/STADIUM – These
effects are available in DSP mode.
- NATURAL : When listening to regular audio (TV/Radio)
- JAZZ : When listening to jazz or pop songs
- CONCERT : When listening to classical music
- STADIUM : When listening to live music or sports broadcast
- 4 STEREO : When listening to the sound field effect close to
- STEREO : When listening to the original sound using the front
MATRIX./MOVIE/MUSIC (Dolby Pro Logic II) – These effects
are available in Dolby Pro Logic II mode.
- MOVIE : Select this when watching a movie.
- MUSIC : Select this when there are many musical elements.
- MATRIX : Select this if the source is regular audio.
FR (Front
SL (Surround
Dolby Pro Logic II
Dolby Pro Logic II is new form of multi-channel audio signal
decoding technique that is improved from the existing Dolby
Pro Logic.
Dolby Pro Logic II separates Dolby Sound recordings as well as
regular stereo audio (video audio, TV broadcast, external input)
into 5.1 channels (front left and right, center, and surround left and
right) so you can enjoy regular audio signals with 6 speakers.
In addition, you can set different modes depending on the content
and format of audio and more accurately adjust the sound field.
• Depending the type of disc being played, the effect of each
• During playback of a DVD encoded in 2 or more channels,
• When you select a surround mode during playback of a
the original sound
speakers and subwoofer
(You can experience the feeling of actually being at
the movies.)
(You can experience the feeling of actually being at a
live concert.)
(You can listen to mono tunes in 5.1-Ch Surround
mode.)
surround mode may vary.
a surround mode cannot be selected.
MP3, WMA or Audio CD, the 5.1-CH Surround Sound will
be selected.
GB
NATURAL [NATURAL]
JAZZ [JAZZ]
CONCE [CONCERT]
STA [STADIUM]
MOVIE [MOVIE]
MUSIC [MUSIC]
MA [MATRIX]
4 STEREO [4 STEREO]
STEREO [STEREO]
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cht-500

Table of Contents