Contents Foreword Safety Instructions ..................Disc Type and Characteristics............... DVD-VCR Overviews Front View of the DVD-VCR ................Rear View of the DVD-VCR................Infrared Remote Control ................Display Indicators ..................Accessories ....................Connecting Your DVD-VCR Deciding How to Connect DVD-VCR............. Connecting DVD-VCR to the TV using the Coaxial Cable ......Connecting DVD-VCR to the TV using the RCA Cable.........
Page 3
Contents (cont.) Playing Back Playing a Cassette..................Adjusting Picture Alignment Automatically ............ Adjusting Picture Alignment Manually ............Selecting the Audio Output Mode..............Playing a Cassette in Slow Motion ..............Playing a Sequence Frame by Frame ............Playing a Sequence at Variable Speeds ............Picture Search, Fast Forward/Rewind............
Page 4
Contents (cont.) Appendix A - Advanced Connections Connecting the FM and AM antennas ............Connecting the Speakers ................LINE3 AUDIO Setting ..................Speaker Volume Control ................Speaker setup ....................Dolby Pro Logic II decoder ................SOUND mode/effect function ................ Listening to radio broadcasts................. Presetting stations ..................
Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. Do NOT expose the DVD-VCR Do NOT expose the DVD-VCR Do NOT expose the DVD-VCR to extreme temperature condi- to direct sunlight.
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos : Max. Disc Types Recording Disc Size Playing Characteristics (Logos) Types Time Single-sided • DVD contains excellent sound 240 min. 12 Cm and video due to Dolby Digital Double-sided...
Front View of the DVD-VCR VIDEO CASSETTE STANDBY/ON OPEN/CLOSE FM/AM DVD DECK EJECT BUTTON RECORD BUTTON BUTTON COMPARTMENT BUTTON COPY F.F/SKIP NEXT INPUT SELECT BUTTON BUTTON DVD/VCR SELECT STOP VOLUME PLAY/PAUSE SOUND BUTTON BUTTON BUTTON EFFECT PROGRAMME HEADPHON SELECTION REW/SKIP BACK JACK BUTTONS BUTTON...
Infrared Remote Control STANDBY/ON OPEN/CLOSE, EJECT SPEAKER SELECT TEST MODE, REPEAT ANGLE TV VOLUME TV SELECT DVD, VCR, FM/AM, INPUT SELECT 10 REWIND, SKIP BACK 11 STOP 12 DISPLAY 13 SETUP 14 UP 15 LEFT 16 ENTER 17 RECORD 18 MARK, INDEX 19 AUDIO 20 TITLE, SPEED 21 TV STANDBY/ON...
10 Tape Speed 11 The VCR Deck is selected Accessories You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box. AUDIO & VIDEO CABLE OWNER’S INSTRUCTIONS COAXIAL CABLE...
Deciding How to Connect DVD-VCR You must take into account various factors when connecting audio or video systems: Types of connectors available on your systems Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily (camcorder for example) Your DVD-VCR is equipped with the following connectors.
Connecting DVD-VCR to the TV using the Coaxial Cable To receive television programmes a signal must be received from one of the following sources: An outdoor aerial An indoor aerial A cable television network A satellite receiver Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
Connecting Other Equipment to Your DVD-VCR You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following illustrations give a few examples of the connection possibilities. The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as camcorders, VCRs or sound systems.
Plug & Auto Set up Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use. Connect the coaxial cable as indicated on page 11.
Tuning Your Television for the DVD-VCR You must tune your television for the DVD-VCR only if you are not using a RCA cable To view pictures from your DVD-VCR when a RCA cable is used, the television must be set to the audio/video mode (AV).
Deck Control Keys The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck. STANDBY/ON Button Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR. DVD Button Press the DVD button on the remote control when you want to control the DVD deck.
Copying from DVD to VCR The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision®...
Inserting Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: Purchase the DVD-VCR Find that the remote control is no longer working correctly Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control.
Menu Language Open “MAIN MENU” With the DVD in stop mode, press the SETUP button. Set “Language” and ➛, ❿ buttons, move the selection arrow to Using the ❷ Language set then press ENTER button. Set menu Language Move the selection bar to your desired Language, then press ENTER button.
Presetting the Stations Automatically You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on MAIN MENU page 13). Your DVD-VCR contains a built-in tuner used to receive television broadcasts.
Presetting the Stations Manually You do not need to preset the stations manually if you have already set them automatically. Press the SETUP button on the remote control. MAIN MENU Result: The MAIN MENU is displayed. or ➛, ❿ buttons to select the Press the corresponding ❷...
Clearing a Preset Station If you have stored a TV station: That you do not require At the wrong programme position MAIN MENU you can cancel it. Press the SETUP button on the remote control. INSTALLATION RETURN ➛ ❿ ENTER or ➛, ❿...
Changing the Preset Station Table You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences. MAIN MENU Press the SETUP button on the remote control. or ➛, ❿ buttons to select the Press the corresponding ❷...
Selecting the RF OUT Sound Mode (B/G-D/K) You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR. MAIN MENU Press SETUP on the remote control. Result: The MAIN MENU is displayed. or ➛, ❿ buttons to select the Press the corresponding ❷...
Selecting the Colour Mode Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. MAIN MENU When playing back a cassette, the standard is automatically selected by the DVD-VCR.
Intelligent Picture Control The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. MAIN MENU During playback, press the SETUP button on the remote control. Result: The MAIN MENU is displayed. or ➛, ❿...
Auto Power Off The Auto Power Off feature automatically turns off your DVD-VCR if no signal is received and you do not press any button for the selected time. MAIN MENU Press SETUP on the remote control. Result: The MAIN MENU is displayed. or ➛, ❿...
Selecting the Cassette Type If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted. MAIN MENU Press SETUP on the remote control. Result: The MAIN MENU is displayed. or ➛, ❿...
Displaying/Hiding On-Screen Information Your DVD-VCR displays most information both on the DVD-VCR and the television. You can choose to display or hide this information on the television screen (except for the Index, MAIN MENU and MAIN MENU Timer functions, which cannot be hidden). Press SETUP on the remote control.
Protecting a Recorded Cassette Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. If you wish to protect a cassette, break off the tab using a small screwdriver.
Recording a Programme with Automatic Stop This function enables you to record up to nine hours (LP) of programmes. Your DVD-VCR stops automatically after the requested length of time. Switch on the television. To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).
Using the Timer Programming Feature The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. 1/JAN TUE 12:09 Before presetting a recording, check that the date and PR DAY START STOP...
Checking a Preset Recording You can check your preset recordings: When you have finished presetting the DVD-VCR If you have forgotten which programmes will be recorded 1/JAN TUE 12:09 PR DAY START STOP Press TIMER on the remote control. 1 SA 9 12:00 12:50SP -- ---- --:-- --:---- Result: The timer programme is displayed.
Playing a Cassette This function allows you to play back any pre-recorded cassette. Switch on both the television and your DVD-VCR. Insert the video cassette to be played. If the safety tab on the ❿ cassette is intact, press Otherwise, the cassette is played automatically. When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking).
Selecting the Audio Output Mode You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available. Option Description Used to listen to the sound on the left Hi-Fi channel. Used to listen to the sound on the right Hi-Fi channel.
Playing a Sequence Frame by Frame You can: Stop the cassette at a given frame (image) Advance one frame at a time No sound is heard when playing back frame by frame. Press: ❿ ll to start playing the cassette ❿...
Picture Search, Fast Forward/Rewind Picture Search enables you to Fast Forward or Rewind and look for a particular part of a tape. Press PLAY, the VCR will enter normal play mode. While in play, press and release the ❿ ❿ ➛...
Using the Tape Counter The tape counter: Indicates the elapsed time in the play and record modes (hours, minutes and seconds) Is reset when a cassette is inserted in the DVD-VCR Allows you to find the beginning of a sequence easily If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
Connecting an RCA Audio/Video Input Cable You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. Examples: You wish to copy a video cassette with the help of a second VCR (see page 39).
Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change. Insert the cassette to be edited in your DVD-VCR. ❿ Press the ll button to start playback.
Audio Dubbing a Pre-recorded Cassette With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from: A CD, DVD A microphone connected to a sound system A cassette player Restriction: Audio dubbing is applicable only to the longitudinal audio track (normal audio).
Using the TV Buttons on the Remote Control Your DVD-VCR remote control will work with Samsung televisions and compatible brands. To determine whether your television is compatible, follow the instructions below. Switch your television on. Point the remote control towards the television.
SQPB (Super VHS Quasi Playback) This function is for playback of Super VHS format tapes only, not for recording. Inset the SVHS format tape that you want to see. ❿ Press PLAY ( ll) to start playing the cassette. Press SVHS button to start SQPB. If the SQPB is on during normal playback, the video output is distorted.
Choosing a Connection The following show examples of connections commonly used to connect the DVD-VCR with a TV and other components. It is only available for DVD. The VCR out can not watch by this connection. Connection to an Television Television Television Component...
Using the Setup Menu The Setup menu lets you customize your DVD-VCR by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. MAIN MENU With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed.
Using the Disc Menu Language This function changes the text language only on the disc menu screens. MAIN MENU With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed. or ➛, ❿ buttons to select the DVD Press the corresponding ❷...
Setting Up the Audio Language Features MAIN MENU Using the Audio Language: With the unit in Stop mode, press the SETUP button on the remote. Result: The MAIN MENU is displayed. DVD SETUP or ➛, ❿ buttons to select the DVD ➛...
Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that MAIN MENU have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Setting Up the Audio Options With the unit in Stop mode, press the SETUP button on the remote. MAIN MENU Result: The MAIN MENU is displayed. or ➛, ❿ buttons to select the DVD Press the corresponding ❷ option. Press the ENTER button to select this option. DVD SETUP Result: The DVD SETUP menu is displayed.
Setting Up the Display Options With the unit in Stop mode, press the SETUP button on the remote. MAIN MENU Result: The MAIN MENU is displayed. or ➛, ❿ buttons to select the DVD Press the corresponding ❷ option. Press the ENTER button to select this option. DVD SETUP Result: The DVD SETUP menu is displayed.
S-Video Connections (for DVD) The S-Video is only for the DVD player. The tuner and VCR will still be viewed through the RF or line inputs. You must follow the “DVD Out” instructions on page 49 to activate your alternative (S-Video) video selection. If your television is equipped with S-Video input, you can enjoy superior video quality when watching DVDs with your DVD-VCR.
Special Playback Features During DVD/CD playback you can select from the following ❿ special playback options. To resume normal playback, press the (Play/Still) button. Still ❿ Press the ll (Play/Still) button on the remote control during playback. • The picture will still and the audio will mute. ❿...
Using the Display Function (DVD/VCD/CD) When Playing a DVD During play, press the DISPLAY button on the remote. - Current title, chapter number, elapsed time, audio and subtitle will be displayed. • Use the NUMBER buttons to enter a different title, then ➛❿...
Repeat Play Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. Press the REPEAT button on the remote. Repeat screen appears. Select Chapter, Title or A-B using the ➛ or ❿ buttons. - Repeat A-B •...
Program Play (CD) Press the MODE button. Use the ➛ or ❿ buttons to select PROGRAM. Press the ENTER button. Use the ➛ or ❿ buttons to select the first chapter (or track) to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box.
SCREEN FIT Play During play, press SCREEN FIT button on remote control. - Allows you to eliminate the black bars in the top and bottom of the screen when a movie is playing in the Widescreen format (16:9). - Screen Fit will not work when the Zoom mode is active. (you can not remove the black bars on the screen) However, Zoom mode will work when Screen Fit is active.
Selecting the Audio Language (Using the Audio button) You can select a desired language quickly and easily with the AUDIO button. Press the AUDIO button. Use the buttons to select the desired language on a DVD. ❷ - The audio languages are represented by abbreviations. •...
Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can select the Angle function. Press the ANGLE button to see if an ANGLE ( ) mark is present at the upper right hand corner of the screen. When an ANGLE mark is shown, press the ANGLE button, then an ANGLE select icon will appear at the upper left hand corner of the screen.
Using the Bookmark Function (DVD/VCD) The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you can quickly find the section at a later time. During play, press the MARK button on the remote. The Bookmark icons will be displayed.
Using the Zoom (DVD/VCD) During play or still mode, press the ZOOM button on the remote. A square will be displayed on screen. or ➛, ❿ button to select the part of the screen you Use the ❷ want to zoom in on. Press the ENTER button.
MP3 Play When an MP3 Disc is inserted into the DVD-VCR, the first song file of the first folder plays. Total : 3 1 music c1 music c1 Press STOP to stop playback of the first song file, then press 2 music c2 3 music c3 song1...
MP3 Play ( CD-R MP3 disc requirements) When playing CD-R MP3 discs, please follow the recommendations below: • Your MP3 files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and with Apple's Mac.
Connecting the FM and AM antennas FM antenna connections • Connect the FM antenna to the FM 75 COAXIAL terminal. • Unwind the antenna wire and then fasten it to a wall in an area where reception is best. - If reception is poor, connect the outdoor antenna. Remove the existing FM antenna before connecting the 75 coaxial cable.
Connecting the Speakers Connect the front, center, and surround speakers and the subwoofer to the speaker terminals on the back of the main unit. Connect the speakers to the speaker output terminals on the back of the main unit, matching the colors. Caution Do not set the Speakers (except center speaker) near the TV or Monitor because the Speakers (except center speaker) are not magnetic shielded.
LINE 3 AUDIO Setting Open “MAIN MENU” With the DVD in stop mode, press the SETUP button. MAIN MENU Select “Options” Using the up/down and left/right buttons, move the selection cursor to “USER SET”, then press ENTER to select. USER SET Select “LINE3 AUDIO”...
Speaker setup Open “SETUP MENU” Ideal speaker placement With the DVD in stop mode, press the SETUP button. Select “DVD” Using the up/down and left/right buttons, move the selection cursor to “DVD Setup”, then press ENTER to select. Select “Audio Options” Move the selection bar to “Audio Options”, then press ENTER to options.
Page 66
Speaker setup To adjust the speaker balance Press the SPEAKER button. • Each time you press the button, the speaker is selected in the order of FL VOL. You will see this on the unit's display. Use the + and - buttons to adjust the volume on the desired speaker.
Dolby Pro Logic II decoder Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvement over conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but also regular stereo sources into five channels (front left/right, center and surround left/right).
SOUND mode/effect function This feature simulates the sound of different acoustic spaces. Press the SOUND MODE button. PL II • Each time you press the button, the sound mode changes as NATURAL follows. JAZZ • The SOUND mode adds a coustic surround effect during playback of stereo analog or linear PCM digital CONCERT...
Listening to radio broadcasts You can automatically or manually tune in to FM and AM stations to listen to radio broadcasts. Press the FM/AM button. • Each time you press the button, the band alternates between FM and AM. Tune in to a station. •...
Technical Specifications Rated voltage AC 220 - 240V, 50Hz Operating ambient temperature +5°C ~ +35°C General Installation conditions Operation position : Horizontal, Relative humidity : Below 75% Video input (Rear) RCA jack : 1.0Vp-p (unbalanced) 75 Input Audio input (Rear) RCA jack : -8dBm, 47Kohm unbalanced RF out UHF 21-69 (Initial CH36)
Page 71
FRONT SPEAKER 50W X 2 (6 ) CENTER SPEAKER 50 W (6 ) SURROUND SPEAKER 50 W X 2 (6 ) SUBWOOFER SPEAKER 100 W (3 ) FREQ.RESPONSE 20 Hz ~ 20kHz S/N RATIO 75 dB CHANNEL SEPERATION 50 dB 5.1 CHANNEL SPEAKER SYSTEM SPEAKER SYSTEM SPEAKER...
Problems and Solutions (VCR) Before contacting the Samsung after-sales service, perform the following simple checks. Problem Explanation/Solution No power Check that the power plug is connected to a wall outlet. Have you pressed the STANDBY/ON button? You cannot insert a video cassette A video cassette can only be inserted with the window side up and the safety tab facing you.
Troubleshooting Guide (DVD) Before requesting service (troubleshooting) Problem Action Page Ensure that the disc is installed with the label side facing up. Check the region number of the DVD. Disc does not play. This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a VIDEO-CD or a CD.
Page 74
THIS APPLIANCE IS DISTRIBUTED BY www.samsung.com AK68-00096Q(01) 2003.04.08...