Connecting Dvd-Vcr To The Tv Using The Coaxial Cable; Connecting Dvd-Vcr To The Tv Using The Rca Cable - Samsung DVD-V 70 Instruction Manual

Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily
GB
(camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type
LINE 1 Rear Audio/Video RCA
Audio output Rear Audio RCA
LINE 2 Front LINE 2
Audio/Video
COMPONENT Rear RCA
output
S-VIDEO Rear S-JACK
output
Digital AUDIO Rear Optical
output coaxial
75 Ω
OUT TO TV Rear
coaxial
75 Ω
IN FROM ANT. Rear
coaxial
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
12
Direction Recommended Use
In/Out Television
Other VCR
Out Audio out (DVD only)
In Audio in
Video in
Out COMPONENT out (DVD only)
Out S-Video out (DVD only)
Out Digital Audio out (DVD only)
(DVD-V80/ DVD-V85)
Out Television
In Aerial
Cable television network
Satellite receiver

Connecting DVD-VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75Ω coaxial socket marked
rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the TV socket on your
DVD-VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.

Connecting DVD-VCR to the TV using the RCA Cable

TV
3
RF coaxial cable
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD-VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
2
on the
TV
4
3
Aerial
2
13
GB