Searching For A Specific Sequence - Samsung CHT-500H Instruction Manual

VCR

Searching for a Specific Sequence

GB
38
Each time you record a cassette on this DVD-VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows:
Prev Seq. being
Next
Seq. played Seq. etc.
etc.
2 1 1 2
This DVD-VCR uses a standard indexing system (VISS).
As a result, it will recognize any indexes marked by
other VCRs using the same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the [0:00:00] counter
position on a cassette. Press the CLEAR button at the point on the tape
where you want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the [0:00:00] counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the Go To [0:00:00] option is selected.
2 Press the OK or ❿.
End Search
Use this feature when you want to search for a blank position to record
a program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1 After pressing the SEARCH, press the corresponding
buttons, until the option is selected.
End Search
2 Press the OK or ❿.
Searching for a Specific Sequence
Intro Scan
1 After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan
2 Press the OK or ❿ .
3 ➛ ➛ ❿ ❿
Press the or buttons depending on the direction
where your desired programme is located.
4 When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5
If you want to watch the tape from a particular Index, simply
❿ II
press twice.
ndex Skip Search:
I
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
or
❷
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan
2 Press the OK or ❿ .
3
Press the ➛ ➛ or ❿ ❿ buttons twice more.
This will take you directly to the start of the desired programme
is located.
4 These Index searches can be made forwards: (press
➛ ➛
backwards: (press
5
To cancel an Index search simply press the
or
❷
or
❷
option is selected.
or
❷
option is selected.
❿ ❿ ) or
➛ ➛ ❿ ❿✌
). ( -20 0 +20
❿ II
or button.
3
VCR
GB
INTRO SCAN :
INDEX SEARCH : - 06
3
39