Sound Mode/Effect Function; Listening To Radio Broadcasts; Presetting Stations - Samsung CHT-350 Instruction Manual

SOUND mode/effect function

GB
1
2
Dolby Pro Logic II
ON
Mode
PL II STEREO
Source
Video Tape
TV, FM/AM
LINE 3
OPTICAL
(PCM)
The Sound mode and effects do not Work With Dolby Digital, DTS, VCD, MP3, LPCM
disc, and Optical Input(OPTICAL) sources.
Dolby Digital, DTS, Optical Input (Dolby Digital) : 5.1-Channel speaker output
VCD, MP3, LPCM, Optical Input (PCM) : Outputs to the front left, right, and subwoofer
speakers only.
During DTS or MPEG playback, audio is output only to the speakers.
Audio is not output using other connections.
68
This feature simulates the sound of different acoustic spaces.
1
Press the SOUND MODE button.
• Each time you press the button,
the sound mode changes as
follows.
• The SOUND mode adds a coustic
surround effect during playback of
stereo analog or linear PCM digital
signals.
2
Press the SOUND EFFECT button.
• Each time you press the button, the selection alternates between
EFFECT 1 and EFFECT 2.
• The higher the number, the greater the effect.
• If you press the button while in the STEREO mode, the selection
alternates between STEREO and 4 STEREO.
• When in 4 STEREO mode, you'll hear equal output from
the front and rear speakers.
: 5.1ch
: STEREO
OFF
NATURAL JAZZ CONCERT

Listening to radio broadcasts

You can automatically or manually tune in to FM and AM stations
to listen to radio broadcasts.
1
Press the FM/AM button.
PL II
• Each time you press the button, the band alternates between
FM and AM.
NATURAL
2
Tune in to a station.
JAZZ
• Automatic tuning : Hold down l➛➛ / ❿ ❿l to begin the
automatic tuning.
CONCERT
• Manual tuning : Press l➛➛ to tune in to a lower frequency, or
press ❿ ❿l to tune in to a higher frequency.
STADIUM
The FM/AM function cannot be selected while operating the
DVD player or VCR.

Presetting stations

Example: Storing an FM station of 89.1 MHz into the preset number
02 of the FM1 band
1 Press the FM/AM button to select the FM band.
• Each time you press the button, the band alternates between
FM and AM.
STADIUM
2
Select a channel to choose the memory address to which you want
to store the station.
Use the ➛➛ and ❿ ❿ buttons to tune in to 89.1 FM.
3
4
Press the
• 89.1 FM is stored in FM1.
5
. Select a channel to select a preset station number.
6 . Press the
station 89.1 to FM 1.
7 . To store other stations Repeat steps 1 to 6 above.
• You can use the CHANNEL button to store up to 20 FM stations
and 10 AM stations.
will be indicated when tuned to an FM station.
•
• To store other channels, repeat the steps 2 to 4 above.
button or the ENTER button on the remote control.
STOP button or ENTER button again to store FM
GB
1
2
2
2
1
3
3
4
69