Table of Contents
Advertisement
VCR
Presetting the Stations Manually
GB
MAIN MENU
INSTALLATION
RETURN
➛ ❿
ENTER
❷
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:G
VCR OUTPUT CH
:CH36
RETURN
❷
ENTER
TV STATION TABLE
PR
CH
NAME
1
2
3
4
5
❿
❷
SWAPPING:ENTER
RETURN
DELETE:CLEAR
MANUAL TUNING
PR
: 1
CH
: ---
MFT
:
-
NAME
: ----
➛ ❿
❷
MEMORY:ENTER
RETURN
20
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the MENU button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or ➛, ❿ buttons to select the
❷
INSTALLATION
option.
3
Press the ENTER button to select this option.
Result:
The
menu is displayed.
INSTALLATION
4
Press the corresponding
or
buttons, until the
❷
UP
option is selected.
5
Press the ENTER button to select a
MANUAL SET UP
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
or
buttons to select a programme number as
❷
required.
7
Press the ❿ button to preset the station.
Result:
The
MANUAL TUNING
menu is displayed.
Press the ➛ or ❿ buttons to start scanning.
8
Result:
The frequency band is scanned and the first station
found is displayed.
9
Press the
or
buttons until the
NAME
is selected.
❷
The station name is set automatically from the broadcast signal.
10
To change the programme's name, press the ❿ button.
Result:
The first letter of the name flashes.
11
To...
Then...
Select a character
Press the
or
❷
in the name
required character is displayed
(letters, numbers or "-" character).
Move to the next or
Press the ➛ or ❿ buttons
previous character
respectively.
12
If you...
Then...
Wish to store the
Press the
or
buttons until the
❷
station displayed
is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press ENTER to store the station
Do not wish to
Press the
or
buttons until the
❷
store the station
CH
is selected.
displayed
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step
13
6
Repeat this procedure from Step
onwards, until all the required
stations have been stored.
14
On completion, press the RETURN button three times to exit the
menu.
You do not need to preset the stations manually if you
have already set them automatically.
Clearing a Preset Station
If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1
Press the MENU button on the remote control.
2
Press the corresponding
MANUAL SET
INSTALLATION
3
Press the ENTER button to select this option.
option.
Result:
The
4
Press the corresponding
UP
option is selected.
5
Press the ENTER button to select this option.
Result:
The
6
Press the corresponding
TV station is selected. (
7
Press the CLEAR button.
8
Repeat the same procedure from Step
required stations have been cleared.
9
On completion, press the RETURN button three times to exit the
button until the
menu.
MFT
9
,
or ➛, ❿ buttons to select the
❷
option.
INSTALLATION
menu is displayed.
or
buttons, until the
MANUAL SET
❷
TV STATION TABLE
menu is displayed.
or
buttons, until the required preset
❷
)
PR
6
onwards until all the
VCR
GB
MAIN MENU
INSTALLATION
RETURN
➛ ❿
ENTER
❷
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:G
VCR OUTPUT CH
:CH36
RETURN
❷
ENTER
TV STATION TABLE
PR
CH
NAME
1
003
2
3
4
5
❿
❷
SWAPPING:ENTER
RETURN
DELETE:CLEAR
21
Advertisement
Table of Contents
