Table of Contents
Advertisement
VCR
Recording from Another VCR or Camcorder
GB
INPUT
MUTE
2
RETURN
7
MENU
INFO.
CLEAR
/A. DUB
6
REC
TV/VCR
SPEAKER
TEST
SOUND MODE SOUND EFFECT
38
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the rear
of your DVD-VCR, as indicated on page 12.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input
5
Start playing back the cassette to be copied.
6
Hold REC ( ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press
on both VCR and
DVD-VCR.
If you wish to view the cassette being copied:
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
A CD, DVD
A microphone connected to a sound system
A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the Rear of your DVD-VCR.
3
Insert the pre-recorded cassette on which the audio track is to be
❿
replaced, and press the
ll to start playback.
4
Search for the Audio Dubbing (ending) point using the
the counter to 0:00:00 by pressing CLEAR.
5
Search back slightly beyond the Audio Dub start point using the
button.
❿
6
Press the
ll button.
❿
Press the
ll button one more time to make STILL mode.
7
Press A.DUB.
Result:
Your DVD-VCR is now in the Audio dubbing Still
mode.
8
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
9
When you are ready:
Start playback on the sound system
Press the REC( ) on the remote control.
Result:
The soundtrack is replaced on the pre-recorded cassette.
10
The audio dubbing will finish when the counter reaches 0:00:00.
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 34).
VCR
2
2
❿ ❿
, and set
➛ ➛
RETURN
MENU
INFO.
CLEAR
/A. DUB
7
A.DUB
-0:05:23
39
GB
Advertisement
Table of Contents
