Plug & Auto Setup; Seting The Date And Time - Samsung DVD-VR300E Instruction Manual

Plug & Auto Setup
The DVD Recorder-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The process takes
a few minutes. The DVD Recorder-VCR will then be
ready for use.
Connect the RF cable as indicated on page 16.
1
• Connecting Your DVD Recorder-VCR to the TV
using the RF Cable.
Plug the DVD Recorder-VCR into the mains.
2
• "Auto" in the front panel display flickers.
The Language Set menu us displayed.
3
❷
• Using the buttons, move the selection bar
to select the desired language then press OK
button.
Language Set
Start the auto setup.
4
24 - English
English
Français
Deutsch
Español
Italiano
Nederlands
5
Select Country using the
then press OK button.
Country Selection
MOVE OK
• Refer to following abbreviation table when selecting
"Country".
A(Austria) NL(Netherlands)
B(Belgium) I(Italy)
DK(Denmark) N(Norway)
FIN(Finland) P(Portugal)
D(Deutschland) E(Spain)
Start the auto scanning.
6
Check the date and time.
7
• if it is: Correct
Press OK button then the data and time
will be saved.
• if it is: Incorrect
Refer to "Seting the Date and Time"
menu, when you want to change the date
and time.
❷ ➛❿
buttons,
Install
Others
EXIT
S(Sweden) PL(Poland)
CH(Swiss) CZ (Czech)
TR(Turkey) Others
GR(Greece)
HU(Hungary)