On-Screen Menu Navigation; Plug & Auto Setup - Samsung DVD-SR150M Instruction Manual

System Setup
DVD RECORDER Library
No Disc
Library
Title
DivX
Guide
Music
Channel
Photo
Timer Record
Disc Manager
Setup
m MOVE s SELECT r RETURN e
Initial Installation
Country : United Kingdom
English
Language : English
Français
Deutsch
Time Zone : GMT + 00:00
Español
Daylight Saving Time : Off
Italiano
Nederlands
Svensk
OK Dansk
Initial Installation
Country : United Kingdom
Time Zone
Language : English
◄ GMT + 00:00 ►
Time Zone : GMT + 00:00
OK
Daylight Saving Time : Off
OK
Initial Installation
Country : United Kingdom
Language : English
Time Zone : GMT + 00:00
Auto
Daylight Saving Time : Auto
Off
On
OK

On-Screen Menu Navigation

The on-screen menus allow you to enable or disable various functions
on your DVD Recorder.
|
Press the MENU button to open the on-screen menu and then use the
|
| following buttons to navigate through the on screen menus.
|
▲▼, ◄► buttons
1.
Press these buttons on the remote control to move the selection bar
▲▼, ◄► to cycle through the menu options.
EXIT
2. OK button
Press this button on the remote control to confi rm any new settings.
3. RETURN button
Press this button on the remote control to return to the Previous menu
screen displayed or to exit the on-screen menu.
4. EXIT button
Press this button to exit the on-screen menu.
Plug & Auto Setup
Your DVD Recorder will automatically set itself up when it is plugged in
for the fi rst time. TV stations and clock will be stored in memory.
The process takes a few minutes. Your DVD Recorder will then be ready
for use.
1. Connect the RF cable as indicated on page 17.
(Connecting Your DVD Recorder to the TV Using the RF Cable and scart
cable.)
2. Plug the DVD Recorder into the mains. "AUTO" in the front panel
|
|
display fl ickers.
|
Press the OK or ► button, then Language option display.
3.
Press the ▲▼ buttons to select the desired language option, then
press the OK button.
Press the OK or ► button, then Time Zone option display.
4.
Press the ◄► buttons to select the desired time zone option.
Press the ▲▼ buttons to select OK, then press the OK button.
|
|
| Press the OK or ► button, then Daylight Saving Time option display.
5.
Press the ▲▼ buttons to select Auto, On or Off , then press the OK
button.
If you select Auto, then Daylight Saving Time will change automatically
when it is time to change the data.
|
|
|
English - 23