Using Markers - Samsung DVD-R100 Instruction Manual

Using Markers

1 Press the MARKER button.
Marker
2
Press the ENTER button when the desired
scene appears.
The number 1 is displayed and the scene is memorized.
Marker
MOVE
Press the œ √ button to move to the next
3
position.
4 Press the ENTER button when the desired
scene appears.
The number 2 is displayed and the scene is memorized.
01
Marker
MOVE
DVD-RAM or DVD-RW (VR Mode) discs have the
Marker function instead of the Bookmark function.
The Marker function allows you to mark up to 99
scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in
use is encoded with Cartridge Protect or Disc Protect,
Markers cannot be set or deleted. Only playback is
available.
52
- English
(VR mode)
N:0
SELECT RETURN
01 N:1
PLAY CANCEL RETURN
02 N:2
PLAY CANCEL RETURN
Playing Back a Marker
1
Press the MARKER button.
Press the œ √ buttons to select a
2
bookmarked scene.
Marker 01 02
MOVE PLAY
3 Press the ENTER or
playing from the selected scene.
If you press the NEXT SKIP (
PREVIOUS SKIP( )button in marker mode, when
the next or current marked point plays for shorter
than three seconds, playback starts from the previous
marked point.
Clearing a Marker
1
Press the MARKER button.
Press the œ √ buttons to select a book-
2
marked scene.
Press the CANCEL button to delete the
selected bookmark.
Marker 01 02 03 04 05 06
01 02 03 04 05 06
Marker
MOVE PLAY
When a marker is cleared while DVD-RAM/-RW (VR
mode) is playing, marker numbers will change.
For example, if the 7th marker is cleared after ten
markers are registered, the marker numbers after the
eighth will automatically move ahead by one.
N:2
CANCEL RETURN
button to start
)button or the
07 08 09 10 N:10
07 08 09 N:9
CANCEL RETURN