Playing Back A Marker; Using The Markers; Clearing A Marker - Samsung DVD-VR320/XEF Manual

Operating Instructions

Using the Markers

Press the MARKER button during playback.
1
Marker
Press the OK button when the desired scene
2
appears.
• The number 01 is displayed and the scene is
memorized.
Marker
MOVE
Press the œ √ button to move to the next posi-
3
tion.
Press the OK button again when the desired
4
scene appears.
Marker
MOVE
• The number 02 is displayed and the scene is
memorized.
• DVD-RAM or DVD-RW (VR Mode) discs have
the Marker function instead of the Bookmark
function. The Marker function allows you to mark
up to 99 scenes. Since the scenes may be dis-
played as many different pages, numbering is
necessary. Only playback is available.
13-36
(VR mode)
N:0
OK RETURN
01 N:1
PLAY CANCEL RETURN
01 02 N:2
PLAY CANCEL RETURN

Playing back a Marker

Press the MARKER button during playback.
1
Press the œ √ buttons to select a marked scene.
2
01 02
Marker
MOVE CANCEL
PLAY
Press the OK or √ll button to start playing from
3
the selected scene.
• If you press the NEXT SKIP (√√
œœ)button in marker mode,
PREVIOUS SKIP( l
When the next or current marked point plays for
shorter than three seconds, playback starts from
the previous marked point.

Clearing a Marker

Press the MARKER button during playback.
1
Press the œ √ buttons to select a marked scene.
2
Press the CLEAR button to delete the selected
mark.
Marker 01 02 03 04 05 06
Marker 01 02 03 04 05 06
MOVE PLAY CANCEL
• When a marker is cleared while DVD-RAM/-
RW(VR mode) is playing, marker numbers will
change. For example, if the 7th marker is
cleared after ten markers are registered, the
marker numbers after the eighth will automatical-
ly move ahead by one and the 8th marker
becomes the 7th.
N:2
RETURN
l )button or the
07 08 09 10 N:10
07 08 09 N:9
RETURN
English - 47
Samsung Electronics