Recording The Scheduled Record List - Samsung DVD-R100 Instruction Manual

Recording the Scheduled
Record List
1
When one of the scheduled recording times
is up while the recorder is in power-OFF
status, the recorder will be powered on and
start recording automatically.
When one of the scheduled recording times
is up while the recorder is in power-ON
status, a message, that asking you whether
you want to cancel the scheduled recording
or not, will be displayed at about 12 seconds
before the scheduled recording time.
Timer Recording is going to be started soon.
Do you want to cancel timer recording?
When "Yes" is selected: Cancel
When "No" is selected: Recording
If you are not present to set Yes or No,
recording will still begin automatically.
NOTE
2
Thirty seconds before the stop time, a
message that asks whether to automatically
power off or not after recording is displayed.
Timer Recording is going to be ended soon.
And power will be turned off automatically.
Press [ENTER] to continue to use DVD-Recorder.
When "OK" is selected: Power on after recording
If there is no entry: Auto power off
If you are not present to select OK, the
unit will power off automatically after the
NOTE
recording finishes.
40
- English
Yes No
OK
To stop Recording
Press the STOP( ) button, and the message that asks
whether to end recording or not will be displayed.
Do you want to stop recording?
Yes
When "Yes" is selected: Recording stops
When "No" is selected: Recording continues
If disc space lacks or a signal for the
prevention of copy is received during
NOTE
recording, recording will stop.
You cannot record copy protected movie.
If there is no free disc space even though
the start time arrives or the disc is not
recordable, recording will not operate.
(You can record after replacing the disc.)
No