Rf Output Channel; Auto Channel Memory - Samsung DVD-V540 Instruction Manual

RF Output Channel

Use this feature if DVD-VCR is connected to TV using
RF antenna cable.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "Setup" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel," then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Select "RF Output CH"
Move the selection bar to "RF Output CH", then
press right to change.
Ant./Cable : Antenna
RF Output CH : 3CH

Auto Channel Memory

Channel Add/Delete
5 Change "RF Output CH"
A message will appear on your TV.
Then press ENTER to change.
6 Change "TV Channel"
A message will appear on your TV. When the
message disappears, change your TV to channel 3
or 4 to match the RF output channel of the player.
Auto Channel Memory will automatically seek and store
all active channels in your area.
1 Open "MENU"
2 Select "SETUP"
3 Select "Channel"
4 Run "Auto channel memory"
3CH
4CH
ENG-14
Auto Channel Memory
With the DVD in Stop or Play mode, press the
MENU button.
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
Move the selection arrow to "Auto Channel
Memory," then press ENTER to select.
• The DVD-VCR will automatically search for all
available channels in the selected Tuner Band.
This procedure may take a few minutes to
complete.
• When finished, the lowest channel found will be
displayed.
Ant./Cable : Antenna
RF Output CH : 3CH
Auto Channel Memory
Channel Add/Delete