Channel Add/Delete; Rf Output Channel; Front Panel Dimmer - Samsung DVD-V2000 Instruction Manual

00005A DVD-V2000/XAC-Eng2 11/12/02 7:06 PM

Channel Add/Delete

1,3
MAIN MENU
Channel Setup
RETURN ENTER
CHANNEL SETUP
Ant/Cable: [CABLE TV]
Auto channel memory
Channel add/delete
RETURN ENTER
CHANNEL ADD/DELETE
Select channel : [ 01]
and press [ ] to ADD
p r e s s [ ] to DELETE
RETURN CH
20
Page 20
Use this feature if Auto Channel Search missed a channel that you
would like to add, or added a channel you wish to remove.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "Channel"
Using the up/down and left/right buttons, move the selection cursor
to "Channel Setup", then press ENTERto select.
3 Select "Channel add/delete"
Move the selection bar to "Channel add/delete," then press ENTER
to select.
4 Select Channel to add/delete
Use the CH
/ buttons to tune in the channel number you wish
to add or remove.
5 Select "CHANNEL ADD/DELETE"
Press right to add or press left to remove the channel from
your channel list.
• Repeat steps 4 and 5 to add or remove additional channels.

RF Output Channel

1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "Option"
Using the up/down and left/right buttons, move the selection cursor
to "Option Setup," then press ENTER to select.
3 Select "RF Output Channel"
Move the selection bar to "RF Output Channel", then press right
to change.
4 Change "RF Output Channel"
Press Return to change. A message will appear on your TV.
Then press ENTER to change.
5 Change "TV Channel"
A message will appear on your TV. When the message disappears,
change your TV to channel 3 or 4 to match the RF output channel
of the player.

Front Panel Dimmer

You can set the Front Panel Display to be bright all the time, dim
all the time, dim during power off.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "Option"
Using the up/down and left/right buttons, move the selection cursor
to "Option Setup," then press ENTER to select.
3 Set "Panel Display"
Move the selection bar to "Panel Display," then press right to select
from the following options:
• Auto – Front Panel Display will dim automatically during
power off.
• Bright – Front Panel Display will be bright all the time.
• Dim – Front Panel Display will be dim all the time.
MAIN MENU
Option Setup
RETURN ENTER
OPTION SETUP
RF Output Channel 3CH
Panel Display Auto
Auto Power Off Off
RETURN
MAIN MENU
Option Setup
RETURN ENTER
OPTION SETUP
RF Output Channel 3CH
Auto
Panel Display Auto
Bright
Auto Power Off Off
Dim
RETURN
21