Manual Clock Set; Tuner Band Setting - Samsung DVD-V540 Instruction Manual

Manual Clock Set

If Auto Setup fails to set the DVD-VCR's internal clock
by locating a local TV station, follow these steps to set
the date and time manually.
NOTE: For accurate Timer Recording, your DVD-VCR's
internal clock must be set correctly.
1 Open "MENU"
Press the MENU button while the DVD is in Stop or
Play mode.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Clock"
Use the UP/DOWN buttons to highlight "Clock "
then press the ENTER button.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Set the Clock
Use the LEFT/RIGHT buttons to select each of the
following options, then use the UP/DOWN buttons
to set each option:
• Hour – Set the hour
• Minute – Set the minute. • Day – Set the day.
Manual Clock
2004 THU
5 Confirm Settings
Press the ENTER or RETURN button to confirm
your clock settings and to return to the Clock
Set/Adjust.
• Press the RETURN button three times to exit the
menu.
• Month – Set the month.
• Year – Set the year
ENG-13

Tuner Band Setting

This feature allows you to manually set the DVD-VCR's
tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
• Use this setting only if Auto Setup detected the
incorrect tuner band, i.e. channels are coming in on
the wrong channel numbers.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Select "Ant./Cable"
Move the selection arrow to "Ant./Cable" then press
RIGHT button to select from the following options:
• Antenna - Select this if the DVD-VCR is
connected to an indoor or outdoor VHF/UHF
antenna.
• Cable TV - Select this if the DVD-VCR is
connected to Cable TV.
Ant./Cable : Antenna
RF Output CH : 3CH
Auto Channel Memory
Channel Add/Delete
Cable TV
Antenna