Tuner Band Setting; Rf Output Channel; Auto Channel Memory; Channel Add/Delete - Samsung 2004KAISER2 Instruction Manual

Tuner Band Setting

This feature allows you to manually set the DVD-VCR's
tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
• Use this setting only if Auto Setup detected the
incorrect tuner band, i.e. channels are coming in on
the wrong channel numbers.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Select "Ant./Cable"
Move the selection arrow to "Ant./Cable" then press
RIGHT button to select from the following options:
• Antenna - Indicates that the DVD-VCR is
connected to an indoor or outdoor VHF/UHF
antenna.
• Cable TV - Indicates that the DVD-VCR is
connected to Cable TV.
Cable TV
Ant./Cable : Antenna
Antenna
RF Output CH : 3CH

Auto Channel Memory

Channel Add/Delete

RF Output Channel

1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "Setup" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel," then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Select "RF Output CH"
Move the selection bar to "RF Output CH", then
press right to change.
Ant./Cable : Antenna
3CH
RF Output CH : 4CH
4CH
Auto Channel Memory
Channel Add/Delete
5 Change "RF Output CH"
A message will appear on your TV.
Then press ENTER to change.
6 Change "TV Channel"
A message will appear on your TV. When the
message disappears, change your TV to channel 3
or 4 to match the RF output channel of the player.
ENG-12
Auto Channel Memory
Auto Channel Memory will automatically seek and store
all active channels in your area.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Run "Auto channel memory"
Move the selection arrow to "Auto Channel
Memory," then press ENTER to select.
• The DVD-VCR will automatically search for all
available channels in the selected Tuner Band.
This procedure may take a few minutes to
complete.
• When finished, the lowest channel found will be
displayed.
Ant./Cable : Antenna
RF Output CH : 3CH
Auto Channel Memory
Channel Add/Delete
acxz Channel Add/Delete
Use this feature if Auto Channel Search missed a
channel that you would like to add, delete a channel
you wish to remove.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Select "Channel Add/Delete"
Move the selection bar to "Channel Add/Delete,"
then press ENTER to select.
Ant./Cable : Antenna
RF Output CH : 3CH
Auto Channel Memory
Channel Add/Delete
5 Select Channel to Add/Delete
Use the CH / buttons to tune in the channel
number you wish to add or delete.
6 Select "Channel Add/Delete"
Press RIGHT button to add or press left button to
delete the channel from your channel list.
• Repeat steps 4 and 5 to add or delete additional
channels.
CHANNEL ADD/DELETE
Select channel : [02]
and press [❿] to ADD
press [➛] to DELETE
RETURN CH ❷
ENG-13