Record Speed; How To Set A Timer Recording - Samsung DVD-V540 Instruction Manual

Record Speed

You can slow down the recording speed from SP to SLP
in order to fit six hours of programming on a T-120
tape.
1 Start Recording
Follow the Basic Recording instructions on page 30.
2 Set Record Speed
Press the SPEED button on the remote control to
set the Record Speed to one of the following
options:
• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording
time (3 times SP).
NOTE: The selected Record Speed will appear on the
front panel display and on-screen display.
Maximum Recording Time - SP vs. SLP
Tape Length SP (Standard Play)
T-120 2 hrs
T-160 2hrs 40 mins
T-180 3 hrs

How to Set a Timer Recording

Insert a blank videotape into the VCR deck. Be sure to
leave the Record Safety Tab intact.
With the Timer Recording function, you can program
up to 7 events at a time to record up to a month in
advance.
To Begin Setting the Timer Recording,
• Turn on your DVD-VCR, and
• Turn on your TV.
1 Open "MENU"
Press the MENU button or the TIMER button while
the VCR is in Stop or Play mode.
2 Select "Program"
Use the UP/DOWN buttons to highlight
"PROGRAM" then press the ENTER button.
Timer Program
If you want to set
the timer program,
press the ENTER key
SLP (Super Long Play)
6 hrs
8 hrs
9 hrs
ENG-32
How to Set a Timer Recording
3 Select Channel Number
Use the Right and UP/DOWN buttons to set the
channel. Press the RIGHT button to move to the
next setting.
No Ch Start End Date
: :
1
: :
2
: :
3
: :
4
: :
5
: :
6
: :
7
4 Set "Time/Date/Speed"
Repeat Step 3 above to set start time, end time,
date and record speed. Date can be set for one
time, daily or weekly recording. See below.
5 Save "Timer Recording"
Press the RETURN button to finish setting the timer
recording. Stop the VCR or turn the power off.
Then the VCR will automatically turn on and begin
recording at the time you set. To stop the timer
recording, press the POWER button or press the
(STOP) button twice.
Auto Speed Select
If the length of the videotape is not long enough for
a timer recording in the SP mode, set the recording
tape speed to "AUTO". Recording will start in the
SP mode. If the length is not long enough, the tape
speed will automatically change from SP mode to
SLP mode.
Daily/Weekly Date Programming
Weekly [Sun's~Sat's]: Use this to record TV
programs on the same channel at the same time
every week. Daily [MO - FR] : Use this to record TV
programs on the same channel at the same time
every day Monday through Friday.
Speed
/
/
/
/
/
/
/