Page 2
Warning THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside This product incorporates copyright protection technology that is protected by the product. method claims of certain U.S.
Disc Type and Characteristics Disc Markings Disc Type and Characteristics This DVD-VCR is capable of playing the following types of discs with the correspon- Play Region Number ding logos: PAL colour system in Europe, Australia, New Zealand, etc. Disc Types (Logos) Recording Types Disc Size Max.
Description Front Panel Tour of the Remote Control *(DVD-V5450/ 11. MENU DVD-V6400) STANDBY/ON OPEN/CLOSE Used to display the on-screen menu. 12. OK œ œ / √ √ , … … / † † Used to control the cursor in the on-screen menu and confirm your choice.
Getting Connected 1. Connecting DVD-VCR to the TV using the RF 2. Connecting DVD-VCR to the TV using the SCART Cable 3. Connecting DVD-VCR to a Satellite Receiver or Cable Other Equipment You can connect your DVD-VCR to the television using the SCART cable if the appropri- 1.
Page 6
Getting Connected There are several ways to connect your DVD- 2. Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD-VCR and S-Video, Component video and Progressive VCR. Select one of the following video/audio con- AUDIO IN jacks on TV(or AV amplifier). Output Modes necting that best suits you below.
Basic Operation (DVD) Playback Features Slow Motion During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the √ll button. During playback, press the √ll button to still the image. Then press the √√ button to play in slow motion at variable speeds.
Basic Operation (VCR) Playing a Cassette in Slow Motion Playing a Cassette 1. Press the : 1. Switch on both the television and your DVD-VCR. • √ll button to start playing the cassette. 2. Insert the video cassette. If the safety tab on the cassette is intact, press the √ll (play/pause) •...
Basic Recording Recording a Programme Immediately Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). 1 Switch on the television. 1. Switch on the television. 2. Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.
Troubleshooting Identifying DVD Problems Disc does not play. • Ensure that the disc is installed with the label side facing up. • Check the region number of the DVD. • This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD. •...
Troubleshooting Identifying VCR Problems • Check that the power plug is connected to a wall outlet. No power • Have you pressed the STANDBY/ON button? You cannot insert a video cassette •A video cassette can only be inserted with the window side up and the safety tab facing you. •...