Remote Control Unit - Kenwood K-501USB Instruction Manual

Compact hi-fi component system
Hide thumbs Also See for K-501USB:
Table of Contents

Advertisement

Troubleshooting
CD Block
Symptom
Loaded CD cannot be
played back.
CD audio is not output.
CD sound skips.
Even when the CD
pressed, [LOCKED] is displayed
and the disc will not come out.

Remote Control Unit

Symptom
Remote caontrol is
unavailable.
74
English
Place the CD properly with the label side up.
Clean the disc by referring to "Care and storage of CD".
Evaporate condensation by referring to "Be careful against
condensation".
Press CD
Clean the disc by referring to "Care and storage of CD".
Clean the disc by referring to "Care and storage of CD".
Unplug the power cord from the outlet and, while holding
key is
the
key, plug the power cord again.
Replace the batteries with new ones.
Use the remote control unit within the controllable
distance.
Remedy
.
Remedy
See page
8
26 of "Read Before Use"
26 of "Read Before Use"
8
26 of "Read Before Use"
26 of "Read Before Use"
71
See page
15 of "Read Before Use"
15 of "Read Before Use"

Advertisement

Table of Contents
loading

Table of Contents