Clearing The Program; Stopping Program Playback - Kenwood DV-4070 User Manual

.
7
Select Play in the screen using the joystick, then press
start program playback.
¶ When the mode switch of the joystick remote is set to the
Green position and ¢ is pressed, the current track is
skipped and the next track in the program will be played.
¶ Even when a disc is changed during programming, the
program playback plays the disc and track numbers as
registered with the previous disc. In this case, the
programming should be restarted from the beginning.

Clearing the program

1.
Perform operations in steps 1 and 2 of the procedure in "Regis-
tering and playing the program".
2.
Move the cursor to
press .
ENTER
¶ Every time "Last Clear" is selected, the last track in the
program list is cleared. (The program can also be cleared by
pressing the C button.)
¶ When "All Clear" is selected, all tracks in the entire program
list are cleared.

Stopping program playback

Perform operations in steps 1 and 2 of the procedure in
"Registering and playing the program", then press
repeatedly until the player enters normal play mode (track
mode).
¶ The "PGM" indicator turns off.
DVF-R9030
or
Last Clear
All Clear
Program Playback
ENTER
¨
in the screen, then
TOP MENU
SQ.MODE
¨
to
P.MODE
69