Program Play - Kenwood DVF-3200 Instruction Manual

Program play

You can listen to the desired tracks of the current CD, VCD, MP3 or WMA in any desired order.
Program Edit
1
Insert a disc and close the tray. (™)
VCD, Audio CD or MUSIC menu appears.
2
Press P.MODE key
The mark will appear to the right of the word "Pro-
E
gram" on the right side of the menu screen.
To exit the Program Edit mode, Press P.MODE key again.
Video CD:
Press P.MODE key while playback is stopped. The pro-
gram menu appears. Pressand hold P.MODE key again
for a few seconds to exit the menu.
3
Select a specific track on the "List" by Press Cur-
sor up/down (5/∞) keys, then press ENTER key
to place the selected track on the "Program" list.
4
You can select maximum 30 values by repeating
step 3.
5
Select the track you want to start playing on
the Program list.
6
Press PLAY key to start.
Playback begins in the order in which you programmed
tracks. Playback stops after all of the tracks on the
Program list have played once.
÷ The unit stops when the STOP (7) key is pressed. To
restart program play, press the PLAY key.
Example of audio CD menu
mark
E
E
"Program"
"List"
To repeat program play
During program playback, press the REPEAT
key on the remote.
Each press the key switches the mode.
1 "TRACK" : repeats the current track or file.
2 "ALL" : repeats all the tracks (files) on programmed list.
3 Goes off (repeat off)
If you press SKIP (¢) once during Repeat Track
Note Note
playback, the repeat playback cancels.
Delete a track from Program list
1
Press the Cursor (2/3/5/∞) keys to select the
track that you wish to delete from the Program
list.
2
Press CLEAR key.
Delete the complete Program list
Select "Clear All", then press ENTER key.
The complete program for the disc is deleted.
÷ The programs are also cleared when the disc is re-
moved.
P.B.C. on mode of VCD, the Progam play function
(
Note Note
does not work.
25
Basic playback of disc
DVF-3200/DVF-3250 (EN/K,E,X,)