Table of Contents
Advertisement
Menu playback of DVD
When a DVD containing the recording of the top menu or menu is
played, the top menu or menu is displayed.
These menus allow you to select the position you want to play
easily based on an interactive method. (The following operation
procedure is the basic procedure. As the operation procedure may
vary depending on the played software, be sure to read the manual
provided with the software.)
1.
Set the mode switch of the joystick remote to the Green posi-
tion.
TOP MENU
2.
Press
to display the top menu.
SQ.MODE
P.MODE
¶ When the TOP MENU button is pressed again while the top
menu is displayed during playback, the played position
returns to the position where the button was pressed for the
first time and playback restarts from there.
3.
Select the scene to be played by tilting the joystick. (The scene
may sometimes be selected using the numeric buttons.)
4.
Press
to play the DVD from the selected title.
ENTER
¶ To display multiple menus sequentially, repeat steps 3 and 4
above. If the menus are provided in a hierarchical structure,
this operation allows you to move to the menus in the lower
hierarchy level.
¶ When the mode switch of the joystick remote is set to the
Green position and the MENU button is pressed, the menu
is displayed. The operation is the same as that of the top
menu.
DVF-R9030
On Basic Operation
33
Advertisement
Table of Contents
