Pure Audio function
The Pure Audio function allows you to enjoy only the audio
playback. It blocks the video signal to prevent interference between
the video and audio signals so pure audio can be reproduced by
switching the Pure Audio function On. When the video signal is
blocked, the TV screen shows no picture during audio playback.
PURE
AUDIO MODE
Press
function on/off.
¶ When you are operating the joystick remote, set the mode
switch to the Green position then press the P.AUDIO button.
¶ When the Pure Audio function is activated, the PURE AUDIO
MODE button on the player main unit lights up. Pressing
the button again switches the Pure Audio function off and
turns the indicator off.
¶ When an operation for displaying the on-screen message (the
display of the performed operation contents on the TV
screen) or OSD is performed, the video signal is output
temporarily.
¶ With some DVD and VCD discs, the menu may be displayed.
38
on the player main unit to switch the Pure Audio
On Basic Operation
DVF-R9030