Auto Memory Entry; Selecting The Tuning Mode; Switching To The Tv List Screen; Switching To The Name Set Screen - Kenwood VZ-7000N Instruction Manual

TV Control Function
TV Control Screen (Shift)
ATT
T V 1 A 1
S N P S # # # # # # # #
MANU
ATT LOUD
V D
AME SEEK

Auto Memory Entry

You can automatically store all the receivable
channels in the band currently being listened to,
and then recall them with the touch of a button
later. This function is especially useful when you
are travelling and do not know what stations are
available. Up to 6 stations can be stored this way.
1
Select the band for auto memory entry.
2
Touch [ AME ].
[ 4 ] and [ ¢ ] blink.
3
Touch [ 4 ] or [ ¢ ] to start auto memory entry.
The preset station numbers [ 1 ] - [ 6 ] are shown in
order.
When all the stations on a certain band have been
stored in the preset memory, the auto memory
entry stops. The tuner then plays the last station
received.

Selecting the Tuning Mode

You can choose from three tuning modes: auto
seek, preset station seek, and manual. The
"AUTO1" indicator is displayed when auto seek
tuning is selected, and the "AUTO2" indicator is
displayed when preset station seek tuning is
selected.
Each time you touch [ SEEK ], the mode switches as
follows:
▼
AUTO 1 (Auto Seek Tuning)
▼
AUTO 2 (Preset Station Seek Tuning)
▼
MANU (Manual Tuning)

Switching to the TV List Screen

Touch [ LIST ] to switch to the TV list screen

Switching to the Name Set Screen

Touch [ NAME ] to switch to the name set screen
(Page 15 ).
NOTE
You cannot operate unless the parking brake is set.

Returning to the TV Control Screen (Main)

Touch [ ] to return to the TV control screen (Main).
14
S R C
T V
P 1 1 2 c h
1 2 : 0 0
NEWS RDS
B I L
D I R T V
LIST NAME
TV List Screen
MENU
T V 1
1 S N P S # # # # # # # #
2 S N P S # # # # # # # #
TI
3 S N P S # # # # # # # #
4 S N P S # # # # # # # #
5 S N P S # # # # # # # #
6 S N P S # # # # # # # #

Selecting the Band List

Each time you touch [ TV ], the list switches between
the TV1 and TV2.

Selecting the Station

Touch station number or name in the list for the desired
station. The number of the recalled station is displayed.

Station Preset Memory

Store the channel of the station currently being
listened to. You can then recall that station with a
single touch of a button.
Hold down list number [ 1 ] - [ 6 ] on which you want
to store the station, for two seconds or more.

Switching to the Display

Each time [ DISP ] is touched the channel No. display and
the name display switch.

Returning to the Source Control Screen

Touch [ RTN ] to return to the source control
screen (Shift) .
P 1 1 2 c h
DISP
T V
RTN