Frequency Step Setting; Preset Select; Auto Memory - Kenwood DDX630BT Instruction Manual

Frequency Step Setting

Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 kHz.
1 Switch the frequency step
While pressing [TOP] button and [0] button,
press the Reset button.
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.

Preset Select

Lists and selects memorized station.
1 Display the Source
See <Source Control Screen> (page 32).
2 Display the Tuner Preset List Screen
3 Select a station
1 1 1
1 Memorized stations are displayed. Touch to
tune in.
[CTRL] Returns to the Source Control screen.
Control Screen

Auto Memory

Stores stations with good reception in memory
automatically.
1 Display the Source
See <Source Control Screen> (page 32).
2 Select a band you wish to store in memory
3 Select the Auto Memory mode
4 Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
• The operation ends automatically if you do not operate
within 10 seconds.
Control Screen
English 33