Switching Display For Tuner; Rds Features - Kenwood KDC-5018 Instruction Manual

2
Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
NOTE
You can store six stations in each of the FM1, FM2, FM3, and
AM (MW and LW) bands.

Switching Display for Tuner

You can change the display used when listening to the radio.
Switching the Display:
Each time you press the DISP button, the display changes as
follows:
Program Service name (only during RDS station reception)/
Station frequency
Radio text (only during RDS station reception)
Displaying Frequencies during program service name display:
Press the DISP button for at least one second.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
If the RDS station currently tuned to is transmitting no text while
the Radio Text Display mode is turned on, "NO TEXT" will appear
in the display. While awaiting reception, "Waiting" will be
displayed.
2WARNING
To prevent accidents, drivers should not look at the display while
on the road.

RDS features

Function of the KDC-V7018R
NEWS indicator
— 15 —
DISP PTY
#1-6 TI/ AM FM
VOL ADJ
4 ¢
PTY indicator TI indicator
RDS indicator