Switching Display For Tuner; Station Name Preset Play (Snpp) - Kenwood KDC-515S Instruction Manual

Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.

Switching Display for Tuner

You can change the display used when listening to the radio.
Changing the Display:
Each time you press the DISP button, the display changes as
follows:
Station frequency
SNPS name (only when being preset)
Clock
Date
NOTE
The £ indicator lights while the clock is displayed.
Function of the KDC-X615/KDC-6015

Station Name Preset Play (SNPP)

You can search for the station for any station if its name has
been preset using Station Name Preset.
1
Press the DNPP button on the remote.
"SNPP" will be displayed once the station name preset play
mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds each:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
NOTE
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2
Canceling mode during input:
(Function of Remote)
— 15 —
Stations whose names have not been stored will be displayed
as frequencies.
Changing the Displayed Band
Once the name is displayed for the station you want to
listen to
Press the OK button.
Reception starts of the displayed station, and the station name
preset play mode ends.
Press the DNPP button.
The station name preset play mode is canceled.