Station Name Preset Play (Snpp); Switching Display For Tuner - Kenwood KRC-708 Instruction Manual

Tuner features

Station Name Preset Play (SNPP)

You can search for the station for any station if its name has
been preset using Station Name Preset.
1
Press the DNPP button on the remote.
"SNPP" will be displayed once the station name preset play
mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds each:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
Stations whose names have not been stored will be displayed
as frequencies.
NOTE
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2
Once the name is displayed for the station you want to
listen to
Press the OK button.
Reception starts of the displayed station, and the station name
preset play mode ends.
Canceling mode during input:
Press the DNPP button.
The station name preset play mode is canceled.

Switching Display for Tuner

You can change the display used when listening to the radio.
Changing the Display:
(Function of Remote)
NOTE
• When receiving an RDS station to which a name has been
• If the RDS station currently tuned to is transmitting no text
2WARNING
To prevent accidents, drivers should not look at the display while
on the road.
— 16 —
Each time you press the DISP button, the display changes as
follows:
Station frequency
SNPS name (only when being preset) /
Program Service name (during RDS station reception)
(KRC-X858 only)
Radio text (only during RDS station reception)
(KRC-X858 only)
(KRC-X858 only)
preset with Station Name Preset, switching to the program
service name/SNPS name display will result in the program
service name being displayed with priority.
while the Radio Text Display mode is turned on, "NO TEXT" will
appear in the display. While awaiting reception, "WAITING" will
be displayed.