Contrast Adjustment; Dimmer; External Amp Control - Kenwood KDC-5018 Instruction Manual

3
To make the popular colors appear:
Press the preset button (#1-4) for the desired color.
The buttons #1-4 is preset for the following four colors:
#1: White
#2: Red
#3: Blue
#4: Blue Green
4
To switch colors depending on the situation:
(Situational Mode)
Each time you press the #6 button, the mode switches as
follows:
▼
Scan Mode
▼
SRC Mode
(Changing colors depending on the source being played)
▼
Time Mode
(Color changes every six hours)
▼
Situational Mode off
When Situational Mode is off, the original color setting
resumes.
5
To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for at least two seconds to enter the
blue adjust mode.
The 4 and ¢ buttons are used to adjust the blue color
tones, respectively.
Press the #3 button to end the blue adjust mode.
6
To store the color setting in the memory:
(color preset memory)
After adjusting the illumination colors, press the #5 button for
two seconds to store the color setting in the memory.
Pressing the #5 button again recalls the stored colors from the
memory.
NOTE
The Blue Adjust mode setting cannot be stored in memory.
7
Press the MENU button to end the Variable Illumination Color
Setting mode.

Contrast Adjustment

This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5".

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.

External Amp Control

Adjust the bass boost level of the external amplifier using the
main unit.
Display and setting:
"AMP Bass FLT" : Bass boost level is flat. (Default setting)
"AMP Bass +6" : Bass boost level is low (+6dB).
"AMP Bass +12" : Bass boost level is high (+12dB).
NOTE
As of December 2000, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
— 31 —