Demonstration Mode Setting; Basic Operations Of Remote Control; 2 | Dpx-Mp5110U/Dpx-Mp4110/Dpx-Mp3110 - Kenwood DPX-MP3110 Instruction Manual

Menu Operation

Demonstration mode Setting

Turning the demonstration mode ON/OFF.
1
Select Demonstration item during Menu mode
Select the "DEMO" display.
For how to select menu items, refer to <Menu
System>(page 14).
2
Set the Demonstration mode
Press the Control knob for at least 2 second.
Pressing this button for 2 seconds or longer toggles
the setting between "On" and "Off".
3
Exit Demonstration mode
Press the [M.JOG] button.
16
|
DPX-MP5110U/DPX-MP4110/DPX-MP3110

Basic Operations of remote control

VOL
AUD
+
–
FM/AM/ /
2-ZONE
0 — 9
General control
Volume control [VOL]
Source select [SRC]
Volume reduce [ATT]
When the button is pressed again, the volume returns
to the previous level. When the volume is reduced,
the "ATT" indicator fl ashes.
In Audio control
Audio item select
Adjusts the Audio item
⁄
• Refer to <Audio Control> (page 7) for the operation
method, such as the procedures for Audio control and
others operations.
• The remote control can only select and adjust the Basic
Audio item. Selecting and adjusting of the Detail Audio
item cannot be done.
SRC
ATT
DIRECT
[AUD]
[VOL]