Table of Contents
Advertisement
Button
Searches for radio station.
4 / ¢
Selects track/file.
Fast-forwards/reverses tracks if pressed and held.
Changes the display information.
Scrolls the display information if pressed and held.
SCRL DISP
Enters clock adjustment mode directly (page 6) if pressed and held while
in clock display screen.
Selects Random Play. (page 9)
Returns to the previous item.
Exit from setting mode if pressed and held.
Discs that cannot be used
Discs that are not round.
Discs with coloring on the recording surface or discs that are dirty.
You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc
writing software, and your disc recorder instruction manual.)
8 cm CD cannot be used. Attempt to insert using an adapter can cause malfunction.
Getting started
Canceling the display demonstration
The display demonstration is always turned on unless you cancel it.
When you turn on the power (or after you reset the unit), the display shows:
[CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB]
1 Press the volume knob.
[YES] is selected as the initial setup.
2 Press the volume knob again to confirm.
[DEMO OFF] appears.
If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in
step 2, [DEMO MODE] appears and the display demonstration starts.
Setting the demonstration mode
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [DEMO MODE], then press to enter.
3 Turn the volume knob to select [ON] or [OFF].
If [ON] is selected, display demonstration starts if no operation is done for about
20 seconds.
4 Hold
to finish the procedure.
General operation
Continued...
5
Advertisement
Table of Contents
