Installing The Rear Mounting Brackets; Installing The Switch And Rail Assembly; Fastening The Rail To The Front Of The Rack - HP StorageWorks 8/20q Installation And Reference Manual

Fasten each rear mounting bracket to the marked holes, using two M6 machine screws.
Figure 8

Installing the rear mounting brackets

4. Place the switch and rail assembly into the rack through the front, guiding the slotted-rail ends onto the
threaded studs of the rear mounting brackets
holes between the two cage-nuts on each of the front vertical rack posts.
Figure 9

Installing the switch and rail assembly

5. Fasten each rail flange to the front of the rack using two M6 machine screws
Figure 10

Fastening the rail to the front of the rack

34
(Figure 9). Fit the posts on the front rail flanges in the
(Figure 10).