2.
Click Rescan to search the folder displayed in the Firmware Image Folder field. The firmware image files
found are listed in and can be selected from the Version drop-down list.
Figure 39
Load Firmware dialog box
To install firmware:
1.
Select Switch > Load Firmware.
2.
In the Load Firmware dialog box, choose one of the following:
• Select a firmware image file from the Version drop-down list.
• To change the folder (path), click Browse to search for a different firmware image file, select the
desired folder, and then click Rescan to search the selected folder.
3.
Click Start to begin the firmware load process.
A message indicates the type of reset required to activate the firmware.
4.
Click OK to continue the firmware installation.
5.
Click Close to close the Load Firmware dialog box.
HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide
77