Restoring The Factory Default Configuration; Factory Default Configuration Settings - HP StorageWorks 8/20q User Manual

• Switch Properties—Restores all settings presented in the Switch properties dialog box except the
domain ID. See
• Domain ID—Restores switch domain ID in addition to the other switch properties.
• Configured Zoning—Restores all configured zone sets, zones, and aliases in the switch's zoning
database, excluding the active zone set.
• Nicknames—Restores the last saved nickname configuration.
• Call Home—Restores all Call Home configuration and profile settings.
5. If you select the Configured Zoning or Full Restore option and the file contains zone sets, a dialog box
prompts you to activate one of those zone sets. Click Yes, and then select a zone set from the
drop-down list in the Select Zoneset to be Activated dialog box.
6. Click OK and view the results in the top pane of the Restore dialog box.

Restoring the factory default configuration

You can restore the switch and port configuration settings to the factory default values. To restore the
factory configuration on a switch, select Switch > Restore Factory Defaults. The factory default switch
configuration settings are listed in
Restoring the switch to the factory default configuration does not restore the account name and password
settings. The most current port license remains in effect. To restore user accounts, you must select the Reset
User Accounts to Default option in the maintenance menu. See "Recovering a Switch" in the HP
StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide for your switch for
information about maintenance mode and the maintenance menu.
Table 14

Factory default configuration settings

Setting
Symbolic Name
Administrative State
Domain ID
Domain ID Lock
In-band Management
Broadcast Support
Resource Allocation Timeout
(R_A_TOV)
I/O Stream Guard
Device Scan Enabled
Error Detect Timeout
(E_D_TOV)
SNMP Enabled
SNMP Proxy
IP Address
FDMI Enabled
FDMI HBA Entry Level
Subnet Mask Address
Gateway Address
Network Discovery
"Switch properties" (page 58).
Table 14.
Value
8/20q FC Switch
Online
1
False
True
Enable
10000 milliseconds
Auto
True
2000 milliseconds
True
True
10.0.0.1
True
1000
255.0.0.0
10.0.0.254
Static
HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide 73