Mapping A New Inter-Fabric Zone; Add Tr Mapping Dialog - HP StorageWorks 8/20q User Manual

Select a local device from the 1 Select a Local Device column to display the selectable remote devices in the
2 Select a Remote Device column. After selecting a remote device, the selectable TR ports are displayed in
the 3 Select a TR Port column.
Figure 8

Add TR Mapping dialog

Mapping a new inter-fabric zone

NOTE: The local fabric port to be used in the inter-fabric zone must be configured as a TR_Port before the
devices are mapped. See
24
"Port types" (page 95) for information on changing port types.