Configuring Snmp; Snmp Configuration And Trap Configuration Parameters - HP StorageWorks 8/20q User Manual

Table 18 Create IP Security Association dialog box fields (continued)
Field
Authentication
Authentication Key
Encryption
Encryption Key

Configuring SNMP

The Simple Network Management Protocol configuration includes properties and trap parameters plus
SNMP v3 manager and user parameters.

SNMP configuration and trap configuration parameters

SNMP configuration defines how authentication traps are managed. SNMP trap configuration defines how
traps are set. Choose from the tabs Trap1–Trap 5 to configure each trap.
To configure SNMP for switch or a stack:
1. Select a switch or a stack in the fabric tree.
2. Select Switch > SNMP > SNMP Properties to open the SNMP Properties dialog box
stack, select Stack > SNMP Properties.
3. If you selected a stack, choose a switch from the Initial Configuration drop-down list. Changes that you
make to this switch are distributed to the other switches in the stack.
4. Enter information for the SNMP configuration and SNMP trap configuration fields described in
Table 19.
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide 107
Description
Algorithm with which to authenticate the source or destination:
• HMAC-MD5
HMAC-SHA1
•
• HMAC-SHA256
• AES-XCBC-MAC
Key string to use for authentication
Algorithm with which to encrypt outbound data or decrypt inbound data:
• DES-CBC
• 3DES-CBC
• NULL
• BLOWFISH-CBC
• AES-CBC
• TWOFISH-CBC
Key string to use in encrypting or decrypting data
(Figure 60). For a