HP StorageWorks 8/20q User Manual page 85

Table 1 1 Switch data window fields (continued)
Field
First Port Address
World Wide Name
Serial Number
Reason for Status
Vendor
MAC Address
Negotiated Domain ID
Configured Domain ID
Domain ID Lock
Number of Ports
Operational State
Administrative State
Configured Admin State
Beacon Status
Status Group
Operational State
Administrative State
Configured Admin State
Beacon Status
Reason for Status
Temperature
Fan 1 Status
Fan 2 Status
Fan 3 Status
Power Supply 1 Status
Power Supply 2 Status
Temperature Failure Port
Shutdown
Warning Temperature
Failure Temperature
POST Status
POST Fault Code
Test Status
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide
Description
Switch Fibre Channel address
Switch World Wide Name
Number assigned to each chassis
Reason for the operational state
Switch manufacturer
Media Access Control address
Domain ID currently being used by the fabric
Domain ID, defined by network administrator
Domain ID lock status. Prevents (True) or permits (False) dynamic
domain ID reassignment.
Number of physical ports on the switch
Switch operational state: Online, Offline, Diagnostic, Down
Current switch administrative state
Administrative state that is stored in the switch configuration
Switch LEDs are blinking (On) or not blinking (Off).
Switch operational state: Online, Offline, Diagnostic, Down
Current switch administrative state
Administrative state that is stored in the switch configuration
Beacon status. Switch LEDs are blinking (On) or not blinking (Off).
Reason for the operational state
Internal switch temperature °C
Fan 1 operational status (dual power supply model only)
Fan 2 operational status (dual power supply model only)
Not applicable
Power supply 1 operational status
Power supply 2 operational status (dual power supply model only)
Non-configurable (always enabled for this switch). All ports are shut
down when the switch temperature exceeds the Failure Temperature.
Non-configurable temperature threshold, above which a warning
condition alarm is generated
Non-configurable temperature threshold, above which a failure
condition alarm is generated
Current diagnostic state of the switch
Code value for the last recorded diagnostic test result recorded on the
switch
Current diagnostic test status of switch
85