Table of Contents
Advertisement
B. INSTALLATION OF THE COMBI – Overview and General Instructions
DEATH, INJURY, AND EQUIPMENT DAMAGE will result from
improper lifting.
Use enough workers with training and experience lifting heavy
equipment to place the Combi on the supporting surface
1. Select the Combi's operating location.
2. Complete the drain, electric, and water lines before positioning and leveling the Combi.
3. Position and install the Combi.
4. Connect the utility lines after positioning and leveling the Combi.
5. After Setup and Checkout, the Combi should provide years of reliable operation.
Malfunctions and equipment damage will result from improper installation.
Malfunctions and/or damage resulting from improper installation are NOT covered by warranty.
Glass damage resulting from improper use or cleaning is NOT covered by warranty.
Damage from improper use or cleaning, repair, maintenance, descaling, and failure to use appropriate
cleaning products is NOT covered by warranty.
Light bulbs, sealants, and consumable supplies in normal use are NOT covered by warranty
A COMBI MUST BE LEVEL BOTH FRONT TO BACK AND
DANGER
WARNING
All clearance requirements above, below, and
around the Combi are the same for non-
combustible locations as for combustible locations.
CAUTION
DANGER
SIDE TO SIDE IN ALL INSTALLATIONS.
OPERATING A COMBI OUT OF LEVEL WILL CAUSE
CATASTROPHIC DAMAGE.
8
Hide quick links:
Advertisement
Table of Contents
