Mass Storage Device - AT&T Quickfire User Manual

MASS STORAGE DEvICE

Your device can be used as an external memory device.
1.
Before you connect the device, set your device to Mass Storage
Mode. To do this, tap the
Phone > USB Connection Mode
You will need a microSD card to use Mass Storage. If you attempt to
Note
connect to Mass Storage via USB without a card, "SD not
found, cannot access to Mass Storage" will appear.
2.
Connect the Quickfire to your PC with a USB cable.
3.
It is ready when "Found New Hardware USB Modem" appears on
the screen.
4.
Select "My Computer" on the PC.
5.
The phone's memory card will be listed under "Devices with
Removable Storage" in the same location as an optical drive.
6.
File explorer will open in a new window.
7.
Drag and drop the desired files content from the PC window to the
"Storage Card" window.
8.
Disconnect the device from the cable.
PC CONNECTIvITY
Menu icon
and select
> Mass Storage
Settings
>
> Save .
131