Software Update - AT&T Quickfire User Manual

• Camera
- Resolution: Tap "1280 x 960", "640 x 480" or "320 x 240" >
- Quality: Tap "Economy", "Normal" or "Fine" >
- Save to: Tap "Phone Memory" or "SD Card" >
• Camcorder
- Resolution: Tap "320 x 240" or "176 x 144" >
- Quality: Tap "Economy", "Normal" or "Fine" >
- Save to: Tap "Phone Memory" or "SD Card" >

SOFTWARE UPDATE

This menu is used to resume a postponed software update. If new
software exists, the AT&T server notifies devices using a WAP push
message. Before updating new software after downloading it from the
AT&T server, you can decide whether you would like to postpone the
operation. Reminder times can be set to 30 minutes, 1 hour, and 4 hours.
When the time is up, you will be prompted again or you can resume the
postponed operation using this menu at any time.
1.
In Idle mode, tap the
Update
.
• Continue Update: This menu is used to resume a postponed software
• Check for Update: "Check the AT&T server for a new software update?
Menu icon
and select
update.
The software update process will not delete any
personal data on your Quickfire." will appear.
OK No
Tap or .
SETTINGS
Save
.
Save
.
Save .
Save
.
Save .
Save .
Settings Software
>
115 115