Handsets - AT&T E3813B User Manual

5.8 ghz cordless telephone/ answering system with caller id/ call waiting
Hide thumbs Also See for E3813B:
Table of Contents

Advertisement

Appendix
Adding and registering handsets
Your telephone can accommodate up to four cordless handsets. You can add
new handsets (E598-1 or E598-2, sold separately) to the E6012B/E6013B/
E3813B anytime, but each handset must be registered with the telephone
base before use. Each handset must be registered separately.
The handsets provided with your E6012B are pre-registered as handsets 1 and
2. Additional handsets will be assigned numbers in the order they are regis-
tered (handset 3, or handset 4). You can register a maximum of 4 handsets.
The E6013B/E3813B has three handsets pre-registered as handsets 1, 2 and
3. You can register one additional handset, which will be assigned number 4.
The E6014B has four pre-registered handsets, so no additional handsets can
be registered.
NOT REGISTERED
PRESS HNDST LOC
4 SEC ON BASE
PLEASE WAIT...
HS X REGISTERED
Handsets purchased separately need to be registered to the
telephone base before use. When first purchased, all option-
al accessory handsets will show NOT REGISTERED on the
screen. The new handset may need to be charged for five
minutes before registering to the main telephone base.
To register a handset to your telephone base
1. Place the unregistered handset into the telephone base. If
PRESS HNDST LOC 4 SEC ON BASE does not appear on the
handset screen after a few seconds, remove the handset and
place it in the telephone base again.
2. On the telephone base, press and hold
about four seconds (until the red IN USE light on the tel-
ephone base turns on) and then release the button. The hand-
set will show PLEASE WAIT... and it will take about 10 sec-
onds to complete the registration. The handset will show HS X
REGISTERED and will beep if the registration is successful.
NOTES:
1. If the registration is not successful, the display will show NOT REGISTERED.
To reset the handset, remove the handset from the telephone base and
place it back in. Try the registration process again.
2. You cannot register a handset if any telephone connected to the same tel-
ephone line is in use.
47
HANDSET LOCATOR for

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E6012bE6013bE6014b

Table of Contents