Chain Dialing - AT&T CL84100 User Manual

Telephone operation
Options while on calls
To take a call off mute on the telephone base:
• Press MUTE again. When mute is off, Microphone ON
appears temporarily on the screen of the
telephone base.

Chain dialing

Use this feature to initiate a dialing sequence from the numbers in the
directory, caller ID history, or redial memory while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account numbers or access codes) from the directory, caller ID history,
or redial list.
To access the directory while on a call:
Using a cordless handset:
1. Press MENU/
2. Press /SELECT again to enter >Directory.
MENU
3. Press qCID or pDIR to scroll to the desired number.
/SELECT to dial the number shown.
4. Press
MENU
Using the telephone base:
1. Press p/DIR to enter the directory.
2. Press q/CID or p/DIR to scroll to the desired number.
3. Press /SELECT to dial the number shown.
MENU
To access the caller ID history (call log) while on a call:
Using a cordless handset:
1. Press MENU/
2. Press qCID or pDIR to scroll to >Call log, then press
/SELECT.
MENU
3. Press qCID or pDIR to scroll to the desired number.
4. Press /SELECT to dial the number shown.
MENU
Using the telephone base:
1. Press q/CID to enter the call log.
2. Press q/CID or p/DIR to scroll to the desired number.
/SELECT to dial the number shown.
3. Press
MENU
To access the redial list while on a call:
1. Press REDIAL/
the most recently dialed number.
2. Press qCID or pDIR on a cordless handset, or press q/CID or p/DIR on the
telephone base to scroll to the desired number, then press
dial the number shown.
.
SELECT
.
SELECT
on a cordless handset or the telephone base to show
PAUSE
36
Microphone ON
3:58 11/30
PM
Directory
>
Call log
Directory
>Call log
/SELECT to
MENU