Create Directory Entries; To Create A New Directory Entry - AT&T CL84100 User Manual

Directory

Create directory entries

To create a new directory entry

Using a cordless handset:
1. Press MENU/
2. Press qCID or pDIR to scroll to >Directory, then press
/SELECT.
MENU
3. Press qCID or pDIR to select >Add contact.
4. Press /SELECT.
MENU
5. Enter the telephone number when prompted.
• Use the dial pad keys to enter up to 30 digits.
– Press qCID or pDIR to move the cursor to the left
or right.
– Press
MUTE
– Press and hold
– Press and hold
dialing pause (a p appears).
– Copy a number from the redial list by pressing REDIAL/
qCID or pDIR, or pressing REDIAL/
number to copy. Press
6. Press /SELECT to save the number in the display.
MENU
The display shows Already saved if the number is already in the directory.
You cannot save the same number twice.
7. Enter the name when prompted.
• Use the dial pad keys to enter a name (up to 15
characters). Each time you press a key, the character on
that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
– Press qCID or pDIR to move the cursor to the left
or right.
– Press 0 to add a space.
– Press
MUTE
– Press and hold
NOTES:
1. The first letter of every word is a capital letter. The remaining letters in a word start as lowercase
letters as shown in the chart on the next page.
2.
You cannot store a new number to a full directory until you delete one. The screen shows
Directory full.
in idle mode to enter the main menu.
SELECT
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
/PAUSE to enter a three-second
REDIAL
/DELETE to erase a letter.
/DELETE to erase all letters.
MUTE
PAUSE
/SELECT to copy the number.
MENU
44
Answering sys
Directory
>
REVIEW
>Add contact
ENTER NUMBER
888-883-2445_
PAUSE
repeatedly to locate the
ENTER NAME
Robert Brown_
then
Saved