Appendix
Handset and telephone base display screen messages
Screen display messages
Int requires
two handsets
Intercom
Intercom ended
INTERCOM TO:
(For systems with two or
more handsets)
Line in use
Low battery
Microphone ON
Muted
New voicemail
No battery
No line
No signal,
call ended
Not available
at this time
Other handset
is calling
(For systems with two
handsets)
Out of range OR
No pwr at base
Outside call
**Paging**
Paging
all handsets
Phone
Place in
charger
1.Press HS LOC
on base 4sec
There are no registered handsets for the telephone base to
intercom.
The handset is on an intercom call.
The intercom call has just ended.
You have started the intercom process, and need to enter the
number of the handset you wish to call.
An extension phone, or one of the handsets is in use.
You should charge the battery.
Mute is off so the other party can hear your voice.
The microphone is off. The other party cannot hear you.
There are new voicemail messages from your telephone
service provider.
The handset in the charger has no battery installed.
There is no telephone line connection.
The handset is out of range while on a call.
Someone else is using the directory or caller ID history.
The other handset is calling.
The telephone base has lost power, or the handset is out
of range.
You are on the external call during call transfer.
The cordless handset is paged by the telephone base.
The telephone base is paging the handset(s).
The handset is on a call.
The battery is very low. The handset should be charged.
Screen display before handset registration.
74